Thiết bị kiểm tra khuyết tật cho mối hàn
ETherNDE - WeldCheck3
Dual Channel/Frequency Eddy Current Flaw Detector
Gọi (+84) 283 894 0623 để được tư vấn.
Đặc Tính Kỹ Thuật
• Lightweight, ergonomic, rugged design.
• Thumbwheel option for rapid menu navigation.
• Advanced features including Loop, Guides & Automatic Lift-Off Gain Correction.
• Toughened, anti-glare, crisp, daylight readable display, with screen protector.
• Designed to meet IP64, IP68 rated connectors.
• Over 7 hours battery life, fast 2.5 hrs charging time.
• Meets requirements of EN 1711 & ISO 17643 “Eddy Current Examination of Welds by
Complex Phase Analysis”.
Ứng Dụng
Thông Số Kỹ Thuật
| WeldCheck 3 Specification | ||
| Probe | Connectors | 12-Way Lemo 2B (IP68) (Absolute, Bridge and Reflection) and Connection Lemo 00 (IP68) (for single ele- ment absolute probes). Simultaneous probe operation possible using Lemo 12-Way and Lemo 00. |
| Frequency | Single | 10Hz – 20MHz with range variable resolution. |
| Dual | 10Hz - 20MHz | |
| Gain | Overall | -18 to + 104 dB, 0.1, 1 and 6dB steps (104dB maximum) + Mix Gain (-18 to +18dB on Output) |
| Input | 0dB or 12dB | |
| Drive | - 6dB to 10dB in 1dB steps (0dB reference 1mW into 50 ohm) | |
| Max X/Y Ratio | +/-100.0dB | |
| Phase | Range | 0.0-359.9°, 0.1° steps |
| Auto Phase | Allows phase angle to be automatically set to a pre-set angle | |
| Filters | Normal High Pass | DC to 2kHz or Low Pass Filter, which ever is the lower in 1 Hz steps. Plus variable adaptive balance drift compensation 0.01 - 0.5 Hz (6 steps) |
| Normal Low Pass | 1Hz to 2kHz or a quarter of the lowest test frequency, which ever is lower in 1 Hz steps | |
| Balance | Manual | 14 internal balance loads; 2.2μH, 5.0μH, 6.0μH, 6.5μH, 7.0μH, 7.5μH, 8.2μH, 12μH, 15μH, 18μH, 22μH, 30μH, 47μH, 82μH |
| Automatic | Optimised balance load selection | |
| Alarms | Box & Sector | Both Alarm types are fully configurable, Freeze, Tone or Visual |
| Output | Open collector transistor (50v dc at 10mA max) available on 12-way Lemo | |
| Display | Type | 145mm (5.7”), 18 bit Colour, daylight readable |
| Viewable Area | 115.2mm (4.53”) (Horizontal) x 86.4mm (3.4”) (Vertical) | |
| Resolution | 640 x 480 pixels | |
| Colour Schemes | User configurable Dark, Bright and Black & White | |
| Configurable Screen | Full Screen, Single, Dual Spot or Dual Pane with variable size and location and function e.g. XY, Timebase, Waterfall and Meter. | |
| Display Modes | Full Screen, Single, Dual Spot or Dual Pane with variable size and location and function e.g. XY, Timebase, Waterfall and Meter. Spot, Time base (0.1-20 seconds x 1-200 sweeps and up to 55 seconds), Waterfall and Meter with peak hold and % readout | |
| Graticules | None, Grid (4 sizes 5, 10, 15 and 20% FSH), Polar (4 sizes 5, 10, 15 and 20% FSH) | |
| Offset | Spot Position: Y =-50 to +50, X =-65 to +65% | |
| Digital Spot | Display in X, Y or R,θ | |
| Setting | Display/Edit of all settings in Legacy Format | |
| Removable Storage Data | Setup Storage | micro SD up to 32GB, holding over 10,000 settings |
| Stored Screen Shots | micro SD up to 32GB, holding over 10,000 screen shots | |
| Shots | Comprehensive Record, Replay and Storage | |
| Record Replay | Real-time recording of trace data and Replay on instruments and desktop PC up to 164 seconds | |
| Outputs | PC Connectivity | USB (Full PC remote control plus Real Time data) |
| Digital Volt Free Alarm | On Lemo 12-way Open collector transistor (36v dc at 10mA max) | |
| VGA | Full 15 way VGA output | |
| Languages | English, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Turkish, Czech, Norwegian. | |
| Verification Level | The system includes on delivery a 2 year validity Verification Level 2 detailed functional Check and calibration, as per ISO 15548-1:2013. | |
| Power On Self Test | A “self test” on start-up is performed of external ram, accelerometer, Micro SD card, LCD screen buffer. | |
| Power | Battery | Internal 7.2V nominal @ 3100mAh = 22.32 watt.hr |
| Running Time | Over 7 hours with a Weld Probe at 100kHz and 50% backlight | |
| Charging Time | 2.5 hrs. charge time, simultaneous charge and operation | |
| External | 100-240v 50-60Hz 30 Watts | |
| Connector | Lemo OS Hermaphroditic keying, half-moon insert (IP68) | |
| Physical | Weight | 1.15 kg (2.54 lbs) |
| Size (w x h x d) | 222.2mm x 152.2mm x 47.4mm (LxHxW) (8.75” x 6.0” x 1.87”) | |
| Material | Main Body: PC-ABS a blend of the two polymers - Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS). Over-moulded Material: TPE Red Rubber, Thermoplastic Elastomer (TPE). | |
| Operating Temp. | -20 to +60°C (-4 to 140 °F) | |
| Storage Temp. | Storage for up to 12 months -20 to +35°C (-4 to 95°F) Nominal +20°C (68°F) | |
| IP Rating | Designed to meet requirements of IP64 | |
| Optional | |||
| Thumbwheel | Number of Detent | 12 | |
| Material | Polyamide, polycarbonate. | ||
| Advanced Features | |||
| Guides | Create and display a slide show containing instructions, tutorials and procedures using Microsoft PowerPoint. | ||
| Attachments | Screenshots and Data Recordings are saved in a folder with the name of the Settings. | ||
| Loop | Capture a live repetitive signal and then optimise instrument settings (Phase, Gain, Filters) to simplify optimising the parameters | ||
| Trace | Allows a calibration reference signal to be stored on the screen, which can then be compared with a live signal. | ||
| Data Output | Real-time, post processed over USB at 8kHz overall for all 3 data pairs (X, Y and Mix) with DLL for embedding functionality into software. | ||
| Lift Off Gain | Automatically compensates the gain of the defect channel according to the paint thickness. | ||
| Conductivity Features | |||
| Frequency | One frequency only 60kHz standard (choice of 120, 240 and 480kHz) | ||
| Accuracy | 0.5%-10% IACS better than +/-0.05% IACS 10%-25% IACS better than +/-0.25% IACS 25%-60% IACS better than +/-0.5% IACS 60%-110% IACS better than +/-1% IACS Lift Off corrected to 1.0mm No temperature compensation All Errors at 90% Confidence Level | ||
| Resolution | 3 decimal points max Auto Resolution Mode AutoS = Legacy Instrument, Auto = SigmaCheck | ||
| WeldCheck 3 Kit (Keypad Option) : KIWEL300 | |||
| IWEL300 | Instrument, WeldCheck 3, Dual Frequency, (10Hz-20MHz) Portable Flaw Detector. Software + Manual on USB Stick. | ||
| AWEL009 | Accessory, WeldCheck 3 - Lemo Type, Power Adapter & input plugs (UK, EU,US & AUS) | ||
| AWEL003 | Accessory, Adjustable padded shoulder strap, quick-release clips | ||
| AC006 | Accessory, instrument soft carry case | ||
| A090 | USB Cable - A to MINI B, 1m | ||
| 41242 | Quick Reference Card (A5 double sided) - WeldCheck 3 | ||
| ALLCX-M02-015A | Accessory, Lead, Lemo 00 to Microdot, 1.5m (Absolute) | ||
| ALL12-L04-015B | Accessory, Lead, Lemo 12-Way - Lemo 4-Way, 1.5m (Bridge) | ||
| A439 | Split Rings-ID 25.00, Thickness 3mm, (SKU:NPS25) | ||
| WeldCheck 3 Kit (Thumbwheel Option) : KIWEL300TW | |||
| IWEL300TW | Instrument, WeldCheck 3, thumbwheel, Dual Frequency, (10Hz-20MHz) Portable Flaw Detector. Software & Manual on USB Stick. | ||
| AWEL009 | Accessory, WeldCheck 3 - Lemo Type, Power Adapter & input plugs (UK, EU,US & AUS) | ||
| AWEL003 | Accessory, Adjustable padded shoulder strap, quick-release clips | ||
| AC006 | Accessory, instrument soft carry case | ||
| A090 | USB Cable - A to MINI B, 1m | ||
| 41242 | Quick Reference Card (A5 double sided) - WeldCheck 3 | ||
| ALLCX-M02-015A | Accessory, Lead, Lemo 00 to Microdot, 1.5m (Absolute) | ||
| ALL12-L04-015B | Accessory, Lead, Lemo 12-Way - Lemo 4-Way, 1.5m (Bridge) | ||
| A439 | Split Rings-ID 25.00, Thickness 3mm, (SKU:NPS25) | ||
| Optional Accessories | |||
| AAER005 | Hard Transit case | ||
| AWEL010 | Protective Splash Case (keypad only version) | ||
| AWEL011 | Protective Splash Case (thumbwheel version) | ||
| AWEL006 | External 8 x AA battery holder | ||
| ALL12-L04-015R | Accessory Lead, 14-way Lemo to 4-Way Lemo, 1.5m cable, (Reflection Probes) | ||
| ALL12-L04-015B | Accessory Lead, 14-way Lemo to 4-Way Lemo, 1.5m cable, (Bridge Probes) | ||
| ALLCX-M02-015A | Accessory Lead, Lemo 00 to Microdot, 1.5m | ||
| ALLCX-B02-015A | Accessory Lead, Lemo 00 to BNC, 1.5m | ||
