Kiểm tra- Thử nghiệm

Hardness Testers -Model WIKI 30

Portable hardness tester for micro/macro Vickers and Knoop methods with indentation autoreading.

MOTORIZED MEASURING HEAD

Durometro Durezza Rockwell RSD azionamentoJust press one button and the head moves down, applies the force, makes the indentation, reads the indent and moves back upward. Fully motorized with 90 mm of vertical stroke.

CLOSED LOOP (PAT. AFFRI)

Hardness tester Closed LoopClosed loop load cells control load forces with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration.

 

MOTORIZED TURRET (INDENTER/OBJECTIVE)

Durometro Durezza Rockwell RSD azionamentoOne slot for an indenter and one slot for an objective. Auto-rotating and auto-tool-switching for a complete automatic measurement cycle.

360° POSITIONING

Durometro durezza Rockwell Dako Corsa TestaIt is completely uninfluenced by direction so that it can operate up to 360° degrees of positioning, even upside down. Safe clamping on any surface, from round to flat, with self-allignment of the indenter with the measurement axis.

 

TOUCHSCREEN AND SOFTWARE

Durometro RSD durezza Rockwell base d'appoggioPowerful software for test cycle management and automatic indent reading. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.

AUTOFOCUS

Durometro durezza Rockwell prova anelli esterniThe Auto Focus performs an automatic focus adjustment for the selected optic with precise positioning at any magnification. This system reduces reading time thus assuring high reading accuracy.

 

MULTI INDENTATION

Durometro durezza rockwell risultati precisiThe indenter/objective turret slides horizontally for ca 5 mm. The system provides the ability to perform multiple inentations on one axis, with high positioning accuracy, without moving the tester.

BENCH TOP USE

Durometro durezza Rockwell Dako Corsa TestaThe portable tester WIKI 30 can be used as a conventional bench-top hardness tester for very high accuracy tests on small pieces.

WIKI 30

Standards

DIN-EN-ISO 6506 / DIN-EN-ISO 6507 / DIN-EN-ISO 4545 / ASTM-E92 / ASTM 384 / JIS Z231

Horizontal head stroke

ca 5 mm

Vertical head stroke

0/90 mm motorized

Objectives

100X, 200X, 400X

Indenters

Vickers (Knoop and Brinell on request)

Test loads

Vickers (Knoop on request): 0.9807 - 1.961 - 2.942 - 4.903 - 9.807 - 19.61 - 29.42 - 49.03 - 61,29 - 98.07 - 147.1 - 152.98 - 196.14 - 245.17 - 294.21 N

(0.1 - 0.2 - 0.3 - 0.5 - 1 - 2 - 3 - 5 - 6.25 - 10 - 15 - 15.6 - 20 - 25 - 30 kgf)

Feasible tests

Vickers: HV0.1 - HV0.2 - HV0.3 - HV0.5 - HV1 - HV2 - HV3 - HV5 - HV10 - HV20 - HV30

Knoop (On request): HK0.1 - HK0.2 - HK0.3 - HK0.5 - HK1

Brinell (On request)

Accuracy

Better than 0.1 %

Download File

STT
File Download
Sản Phẩm đã xem

Hệ thống đang xử lý, vui lòng chờ