Hardness Testers Dakomaster 300

Automatic hardness tester for Rockwell, Superficial Rockwell, Brinell, Vickers and Shore test methods in compliance with ASTM and ISO hardness standards. Dak...

Test loads: from 1 to 250 kgf (From 9,807 to 2452 N)

Rockwell ISO 6508 / ASTM E-18: HRA - HRB - HRC - HRD - HRF - HRG - HRL - HRM - HRR  /  HRN - HRT

Brinell HBWT ISO 6506 / ASTM E-10: HB 30 - HB 10 - HB 5 - HB 2,5 MPa (F/D2)

Vickers ISO 6507 / ASTM E-384 (Only indentation): HV1 - HV3 - HV5 - HV10 - HV15 - HV20 - HV30 - HV50 - HV100

ONE BUTTON MEASUREMENTS

Rockwell hardness tester one button measurementsJust press one button and the hardness tester's head moves down to make contact with the sample's surface, locking it. The hardness test cycle will automatically begin in automatic succession without breaching a phase. Within seconds results appear.

CLOSED LOOP TECHNOLOGY (PAT. AFFRI)

Hardness tester Closed LoopLoad forces are applied through load cells and controlled in "Closed Loop" with a frequency of 1 khz, assuring perfect linearity in every range. Results are not affected by any structural deflection, misalignment or vibration.

REPEATABILITY AND REPRODUCIBILITY

Hardness tester repeatability and reproducibilityWhen testing unstable samples or deflective parts, the AFFRI System will follow the sample without losing contact. Accurate measurements even on the first test will eliminate the need for repeated tests. The R&R data is at the top of its class.

MOTORIZED TESTER'S HEAD

Hardness tester motorized head strokeAutomatic movement with automatic stop when contact is made with samples. Total of 300 mm of motorized vertical stroke. The approach of the head moving to the piece as opposed to the piece moving to the head allows for more accurate, stable and safe measurements.

LARGE BASE

Rockwell hardness tester wide workholderThe hardness tester’s wide work table base is capable of bearing masses beyond 1000 kg which allows for steady hardness measurements on bulky or irregular pieces. It also offers a comfortable working base for small pieces.

COMPACT TESTER'S HEAD

Hardness tests inside of ringsThe measuring head of the DAKOMASTER 300 hardness tester is small and compact. It can easily test inside tubes with a diameter of 150 mm and above.
 
 

SOFTWARE DAKOMASTER

Rockwell softwareRockwell hardness tester software
The pre-installed software controls the whole instrument during the entire cycle avoiding operator errors:
This software is user friendly in and easily managed by touchscreen. The software, developed by the AFFRI team, is a powerful analysis system, including fast test settings, statistics of results, live graphs and the ability to store data or test sessions.
 
 

Product Downloads

Google+

Liên Hệ

Liên hệ với chúng tôi để được tư vấn về Sản phẩm và các Giải pháp kỹ thuật