Kiểm tra- Thử nghiệm

Cờ-lê định lực thủy lực dạng tròng- Series TXU

Cờ lê dạng tròng có thể đưa vào các vị trí chật hẹp và áp sát bề mặt thao tác. Cờ lê tròng có cấu hình thay đổi linh hoạt và có tính chuyên nghiệp cao.

Uni-Swivel Design
The 360 degree by 180 degree uni-swivel allows

for shorter tool length, accommodating

applications with obstructions.

 

Patented “Peanut-Shaped” Piston
This feature allows the cylinder and ratchet

link to be the same width. Friction reducing

sliders prevent wear on the piston.

Hex Link Cassettes
Each link is fitted with steel alignment pins

connectingthe lower reaction area for added

strength.

No Drip Quick Connect Couplers
These 3:1 rated safety couplers are designed

for simple engagement. The coupler collar

ensures safe operation.

Cylinder and Link Material
Both cylinder and link are manufactured from

4340Aircraft Quality high strength steel alloy.

Nose Radius
Tight nose radius allows this tool to fit in

applicationswhere clearance constraints

makeother tools too bulky.

In-Line Reaction Pad

This design ensures torsion-free reaction every

time.

Link Pin
One pin for link to cylinder engagement - no

tool required for swapping ratchet links.

TXU Inline Reaction Arm
This arm can be attached to the drive cylinder

andratchet link to provide a reaction area

further from the tool.

TXU Tool Handle
This ergonomically designed handle for TorcUP

hydraulic tooling can be attached to the tool

for safeoperation and positioning of the tool,

while keepinghands clear of any reaction points.

TXU Low Point Reaction Paddle
The paddle allows for a reaction point below

the tool or against the edge of the flange.

TXU Link Pin With Landyard
The lanyard design for this accessory allows

the link pin to be tethered to the tool,

preventing lost or dropped pins when switching

out ratchet links.

TXU Spanner Wrench
The line of spanner wrenches for the TX Series,

available in closed end standard sizes and

open orclosed custom sizes, is a unique

solution forapplications where traditional links

will not fit.

TXU Hex Reducer
Custom hex reducers are available for all TX

models to reduce the hex openings on the links.

Thesebushings can reduce 3/16” (5mm) or more,

depending on need.

MODEL TXU-2 TXU-4 TXU-8
Min Torque (ft/lbs) 192 395 830
Max Torque (ft/lbs) 1928 3950 8630
Output Accuracy +/- 3% +/- 3% +/- 3%
Repeatability 100% 100% 100%
Duty Cycle 100% 100% 100%
Cylinder Weight 4.00lbs / 1.8kg 6.90lbs / 3.1kg 12.50lbs / 5.7kg
Link Weight From (lbs) 2.4 5.4 11.9
Link Weight To (lbs) 3.5 7.6 14.5
Link Weight From (kg) 1 2.4 5.5
Link Weight To (kg) 1.5 3.4 6.5
Hex range from 3/4" / 19mm 1" / 25mm 1 7/8" / 49mm
Hex range to 2 9/16" / 65mm 3 1/8" / 80mm 4 5/8" / 120mm
       
       
Kích Thước:      
       
MODEL TXU-2 TXU-4 TXU-8
Length 1 6.45" / 163.8mm 7.87" / 199.9mm 10.18" / 258.6mm
Length 2 5.99" / 152.1mm 6.55" / 166.4mm 7.34" / 186.4mm
Width 1 1.25" / 31.8mm 1.63" / 41.4mm 2.05" / 52.1mm
Width 2 2.19" / 55.6mm 2.26" / 57.4mm 2.26" / 57.4mm
Radius 0.36" / 9.1mm 0.46" / 11.7mm 0.54" / 13.7mm
Height 1 3.84" / 97.5mm 4.93" / 125.2mm 6.18" / 157.0mm
Height 2 1.11" / 28.2mm 1.30" / 33.0mm 1.30" / 33.0mm


 

Download File

STT
File Download
Sản Phẩm đã xem

Hệ thống đang xử lý, vui lòng chờ