Kiểm tra- Thử nghiệm

Cờ-lê định lực thủy lực dạng tròng- Series TX

Cờ lê dạng tròng có thể đưa vào các vị trí chật hẹp và áp sát bề mặt thao tác. Cờ lê tròng có cấu hình thay đổi linh hoạt và có tính chuyên nghiệp cao.

 

Uni-Swivel Design
The 360 degree by 180 degree uni-swivel allows for shorter

tool length, accommodating applications with obstructions.

Patented “Peanut-Shaped” Piston
This feature allows the cylinder and ratchet link to be the same

width. Friction reducing sliders prevent wear on the piston.

 

 

Hex Link Cassettes
Each link is fitted with steel alignment pins connecting the

lower reaction area for added strength.

No Drip Quick Connect Couplers
These 3:1 rated safety couplers are designed for

simple engagement. The coupler collar ensures safe operation.

 

Cylinder and Link Material
Both cylinder and link are manufactured from 4340 Aircraft

Quality high strength steel alloy.

 

Nose Radius

Tight nose radius allows this tool to fit in applications

where clearance constraints make other tools too bulky.

 

 

 

In-Line Reaction Pad
This design ensures torsion-free reaction every time.

Link Pin
One pin for link to cylinder engagement - no tool required for swapping ratchet links.

 

 

TX Inline Reaction Arm
This arm can be attached to the drive cylinder and ratchet link to provide a reaction area further from the tool.

TX Tool Handle
This ergonomically designed handle for TorcUP hydraulic tooling can be attached to the tool for safe operation and positioning of the tool, while keeping hands clear of any reaction points.

 

TX Low Point Reaction Paddle
The paddle allows for a reaction point below the tool or against the edge of the flange.

TX Link Pin With Landyard
The lanyard design for this accessory allows the link pin to be tethered to the tool, preventing lost or dropped pins when switching out ratchet links.

 

 

TX Spanner Wrench
The line of spanner wrenches for the TX Series, available in closed end standard sizes and open or closed custom sizes, is a unique solution for applications where traditional links will not fit.

 

TX Hex Reducer
Custom hex reducers are available for all TX models to reduce the hex openings on the links. These bushings can reduce 3/16” (5mm) or more, depending on need.

PART # TX-1 TX-2 TX-4 TX-8 TX-16 TX-32 TX-45
Length 4.37" / 111.0mm 6.45" / 163.8mm 7.87" / 199.9mm 10.18" / 258.6mm 12.93" / 328.4mm 15.8" / 401.3mm 16.75" / 425.5mm
Width 0.78" / 19.8mm 1.25" / 31.8mm 1.63" / 41.4mm 2.05" / 52.1mm 2.50" / 63.5mm 3.24" / 82.3mm 4.88" / 124.0mm
Radius Range From (in/mm) 0.24" / 6.2mm 0.37" / 9.6mm 0.41" / 10.5mm 0.56" / 14.2mm 0.68" / 17.1mm 0.96"/ 24.3mm 0.96"/ 24.3mm
Radius Range To (in/mm) 0.45" / 11.4mm 0.59" / 15.0mm 0.77" / 18.7mm 0.93" / 21.0mm 1.68" / 25.9mm 1.82" / 44.2mm 1.82" / 44.2mm
Height 3.25" / 82.6mm 4.00" / 101.6mm 5.60" / 142.2mm 7.00" / 177.8mm 7.58" / 192.5mm 9.50" / 241.3mm 10.28" / 261.1mm

 

Download File

STT
File Download
Sản Phẩm đã xem

Hệ thống đang xử lý, vui lòng chờ